Package & Baggage Handling

Conveyor Belts – Lightweight

Package, Airport and Baggage Handling Conveying

From light to heavy loads, and flat to incline and decline conveying, ContiTech Lightweight Conveyor Belts have a solution for every need in package and baggage handling. Our fully integrated manufacturing process and innovative belting solutions result in belts that meet your most exacting requirements.

Available in four carcass constructions – Multi-Plied Spun Polyester, Multi-Plied Monofilament, Single-Plied Interwoven and Needle construction – providing a broad range of abuse-resistant belts for various slider bed, live roller and roller applications. Our unique HPC technology, a homogenous plied construction process, provides superior tracking in both directions and offers excellent splicing capabilities, translating into belts that look better and last longer.

In the package and baggage handling belt conveying industry, there is no room for downtime. That is why we continue to develop extremely abuse-resistant belts and other innovative ways to keep your business moving.

Below are some examples of Package, Airport and Baggage Handling belts. Many other combinations of covers, profiles, colors and fabric carcasses can be produced.


DOWNLOAD BROCHURE


Distributor Locator

Package & Baggage Handling

Package & Baggage Handling

Belts for Package & Baggage Handling

PKG 100MR LLbw | Package Handling with MSHA Flame Retardant
This unique 2 ply belt is ideal for package handling and other general purpose applications where a low coefficient of friction is required on both the top and bottom surfaces.

PKG 100MR LLbw

This unique 2-ply belt is a high-performance, economical alternative to plied rubber belts in package handling and other general-purpose applications where low coefficient of friction surface is required for both top and bottom surfaces. Monofilament fabric in the top and bottom plies provides excellent transverse rigidity so belt lays flat and does not buckle. One monofilament fabric is black and the other is white to increase the applications where this belt can be used, as the belt can be run with either side up.

Technical Data:

Attributes Imperial Metric
Working Tension 100 piw 17.5 KN/M
Number Of Plies 2 2
Fabric Type Polyester x Monofil Polyester x Monofil
Top Surface Low Friction Low Friction
Bottom Surface Low Friction Low Friction
Overall Gauge (Approximate) 0.080 in. 2.0 mm
Weight (Approximate) 0.430 lbs/sq.ft. 2.09 kg/sq.m.
Bottom Coefficient Of Friction 0.18 (approx.) 0.18 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 36 or UCM36
  • Alligator*: 7
  • Staple*: 62

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 100RM TLb-S | Package Handling with MSHA Flame Retardant
Specification incorporates our Ultra Modified cover compound for safely conveying packages, plastic parts and totes on inclined applications.

PKG 100RM TLb-S

Specification incorporates our Ultra Modified cover compound for safely conveying packages, plastic parts and totes on inclined applications. Application areas include package handling facilities, airports, distribution centers and post office locations.

Technical Data:

Attributes Imperial Metric
Working Tension 100 piw 17 KN/M
Number Of Plies 2 2
Fabric Type Combination Combination
Top Surface Tygrip Tygrip
Bottom Surface Low Friction Low Friction
Overall Gauge (Approximate) 0.122 in. 3 mm
Weight (Approximate) 0.790 lbs/sq.ft. 7 kg/sq.m.
Bottom Coefficient Of Friction 0.19 (approx.) 0.19 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 5.1 cm.
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 1A
  • Alligator*: 1
  • Staple*:

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 120N1 BBb | Package Handling with MSHA Flame Retardant
An all-purpose belt that excels in package handling environments.

PKG 120N1 BBb

An all-purpose belt that excels in package handling environments. Performs in roller and slider applications. The needled construction offers low stretch, good tear resistance and excellent fastener retention.

Technical Data:

Attributes Imperial Metric
Working Tension 120 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Needled Felt Needled Felt
Bottom Surface Lo Friction Felt Lo Friction Felt
Overall Gauge (Approximate) 0.110 in. 2.8 mm
Weight (Approximate) 0.64 lbs/sq.ft. 3.1 kg/sq.m.
Bottom Coefficient Of Friction 0.20 (approx.) 0.20 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 36 or UCM36
  • Alligator*: 7
  • Staple*: 62

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 120RS DLb | Package Handling with MSHA Flame Retardant
This unique 2 ply belt is ideal for package handling and other general purpose applications where a low coefficient of friction is required on the bottom surface.

PKG 120RS DLb

This unique 2-ply belt is a high-performance, economical alternative to plied rubber belts in package handling and other general-purpose applications where low coefficient of friction surface is required on the bottom surface. Plain weave polyester fabric in the top ply and Multi x Mono fabric in the bottom provides excellent fastener strength, transverse rigidity so belt lays flat, and static dissipative characteristics. The light fabric impression top cover provides grip for applications that do not want the conveyed objects to slide.

Technical Data:

Attributes Imperial Metric
Working Tension 120 piw 21.0 KN/M
Number Of Plies 2 2
Fabric Type Plain weave Spun Poly Top, Multi x Mono Bottom Plain weave Spun Poly Top, Multi x Mono Bottom
Top Surface Light Fabric Impression Light Fabric Impression
Bottom Surface Low Friction Low Friction
Overall Gauge (Approximate) 0.135 in. 3.43 mm
Weight (Approximate) 0.85 lbs/sq.ft. 4.1 kg/sq.m.
Bottom Coefficient Of Friction 0.18 (approx.) 0.18 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: No
  • Clipper*: #2SP, #3-1
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 120RS GLb | Package Handling with MSHA Flame Retardant
This unique 2-ply belt is a high-performance, economical alternative to plied rubber belts in package handling and other general purpose applications where high coefficient of friction is required on the top surface and low coefficient of friction surface is required on the bottom surface.

PKG 120RS GLb

This unique 2-ply belt is a high-performance, economical alternative to plied rubber belts in package handling and other general-purpose applications where high coefficient of friction is required on the top surface and low coefficient of friction surface is required on the bottom surface. Plain weave polyester fabric in the top ply and Multi x Mono fabric in the bottom provides excellent fastener strength, transverse rigidity so belt lays flat, and static dissipative characteristics. The Groovy-Top impression top cover provides excellent grip for incline applications.

Technical Data:

Attributes Imperial Metric
Working Tension 120 piw 21.0 KN/M
Number Of Plies 2 2
Fabric Type Plain weave Spun Poly Top, Multi x Mono Bottom Plain weave Spun Poly Top, Multi x Mono Bottom
Top Surface Groovy Groovy
Bottom Surface Low Friction Low Friction
Overall Gauge (Approximate) 0.145 in. 3.7 mm
Weight (Approximate) 0.9 lbs/sq.ft. 4.4 kg/sq.m.
Bottom Coefficient Of Friction 0.18 (approx.) 0.18 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: No
  • Clipper*: #2SP,#2HT
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 120Su CBb | Package Handling with MSHA Flame Retardant
The ideal belting for conveying packages, plastic parts and miscellaneous parts.

PKG 120Su CBb

The ideal belting for conveying packages, plastic parts and miscellaneous parts. The hybrid interwoven polyester carcass provides low stretch, excellent fastener retention and good tear resistance, all at an economical price. Advanced weave technology allows for smaller pulley diameters yet resists roll-over. Application areas include package handling facilities, airports and distribution centers.

Technical Data:

Attributes Imperial Metric
Working Tension 120 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Hybrid Polyester Hybrid Polyester
Top Surface Smooth Smooth
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.135 in. 3.4 mm
Weight (Approximate) 0.87 lbs/sq.ft. 4.2 kg/sq.m.
Bottom Coefficient Of Friction 0.22 (approx.) 0.22 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 5.1 cm.
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: #2SP,#2,#3-1
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 125Su CBb | Package Handling with MSHA Flame Retardant
The rugged hybrid interwoven carcass provides excellent tear resistance but also allows for smaller pulley diameters in applications for package handling facilities, airports and distribution centers.

PKG 125Su CBb

The ideal belting for conveying packages, plastic parts and miscellaneous parts. Rugged Hybrid Interwoven carcass provides the tear resistance required for severe service conditions. Advanced weave technology allows for smaller pulley diameters yet resists roll-over. Application areas include package handling facilities, airports and distribution centers.

Technical Data:

Attributes Imperial Metric
Working Tension 125 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Hybrid Polyester Hybrid Polyester
Top Surface Smooth Smooth
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.128 in. 3.6 mm
Weight (Approximate) 0.690 lbs/sq.ft. 4.6 kg/sq.m.
Bottom Coefficient Of Friction 0.19 (approx.) 0.19 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 5.1 cm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: #2SP, #2, #3-1
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA 2G (ASTM D378 flame): Pending
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 125Su FBb | Package Handling with MSHA Flame Retardant
The rugged hybrid interwoven carcass provides excellent tear resistance and a low friction top surface allows for easy loading in applications for package handling facilities, airports and distribution centers.

PKG 125Su FBb

The ideal belting for conveying packages, plastic parts and miscellaneous parts. Rugged Hybrid Interwoven carcass provides the tear resistance required for severe service conditions. Advanced weave technology allows for smaller pulley diameters, yet resists roll-over. Application areas include package handling facilities, airports and distribution centers.

Technical Data:

Attributes Imperial Metric
Working Tension 125 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Hybrid Polyester Hybrid Polyester
Top Surface Friction Friction
Bottom Surface Brush Brush
Overall Gauge (Approximate) 0.128 in. 3.3 mm
Weight (Approximate) 0.690 lbs/sq.ft. 6 kg/sq.m.
Bottom Coefficient Of Friction 0.19 (approx.) 0.19 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 5.1 cm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2, U2, 3
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Pending
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 125Su G2Bb | Package Handling with MSHA Flame Retardant
The rugged hybrid interwoven carcass provides excellent tear resistance and the grooved top surface makes it ideal for incline applications in package handling facilities, airports and distribution centers.

PKG 125Su G2Bb

Specification incorporates our large longitudinal rib cover. It meets all MSHA flame standards for safely conveying baggage, packages and totes on steep incline applications. Rugged Hybrid Interwoven carcass provides the tear resistance required for severe service conditions. Application areas include package handling facilities, airports and distribution centers.

Technical Data:

Attributes Imperial Metric
Working Tension 125 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Hybrid Polyester Hybrid Polyester
Top Surface Groovy Groovy
Bottom Surface Brush Brush
Overall Gauge (Approximate) 0.190 in. 4.8 mm
Weight (Approximate) 0.93 lbs/sq.ft. 8.1 kg/sq.m.
Bottom Coefficient Of Friction 0.2 (approx.) 0.2 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: #2SP, #3-1, #2 (make sure to skive TC)
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • Flash (MSHA 2G): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 125Su GBb | Package Handling with MSHA Flame Retardant
The rugged hybrid interwoven carcass provides excellent tear resistance and the deep grooved top surface makes it ideal for inclines in package handling facilities, airports and distribution centers.

PKG 125Su GBb

Specification incorporates our “Groovy-Top” cover. It meets all 30CFR18.64 flame standards for safely conveying baggage, packages and totes on inclined applications. Rugged Hybrid Interwoven carcass provides the tear resistance required for severe service conditions. Application areas include package handling facilities, airports and distribution centers.

Technical Data:

Attributes Imperial Metric
Working Tension 125 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Hybrid Polyester Hybrid Polyester
Top Surface Groovy Groovy
Bottom Surface Brush Brush
Overall Gauge (Approximate) 0.165 in 4.2 mm
Weight (Approximate) 0.93 lbs/sq.ft. 8.1 kg/sq.m.
Bottom Coefficient Of Friction 0.19 (approx.) 0.19 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 5.1 cm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2, U2, 3
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 125Su TBb | Package Handling with MSHA Flame Retardant
The rugged hybrid interwoven carcass provides excellent tear resistance and the TyGrip top surface makes it ideal for inclines in package handling facilities, airports and distribution centers.

PKG 125Su TBb

Specification incorporates our Ultra Modified cover compound for safely conveying packages, plastic parts and totes on inclined applications. Rugged Hybrid Interwoven carcass provides the tear resistance required for severe service conditions. Application areas include package handling facilities, airports, distribution centers and post office locations.

Technical Data:

Attributes Imperial Metric
Working Tension 125 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Hybrid Polyester Hybrid Polyester
Top Surface Tygrip Tygrip
Bottom Surface Brush Brush
Overall Gauge (Approximate) 0.160 in. 4 mm
Weight (Approximate) 0.910 lbs/sq.ft. 8 kg/sq.m.
Bottom Coefficient Of Friction 0.19 (approx.) 0.19 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 5.1 cm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2, U2, 3
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Pending
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 130LH QLb | Package Handling with MSHA Flame Retardant
The rugged 2 ply carcass provides excellent rip & tear resistance and the quad top surface makes it ideal for power turns in package handling facilities, airports and distribution centers.

PKG 130LH QLb

The rugged 2-ply fabric construction is specially designed for power turn applications that demonstrates very good rip, tear, elongation and fastener holding capability. A quad top cover impression provides grip, and low-friction pulley cover is ideal for slider-bed service.

Technical Data:

Attributes Imperial Metric
Working Tension 130 piw 23 KN/M
Number Of Plies 2 2
Fabric Type Hybrid-Polyester Hybrid-Polyester
Top Surface Quad Quad
Bottom Surface BareLow-Friction BareLow-Friction
Overall Gauge (Approximate) 0.117 in. 3.0 mm
Weight (Approximate) 0.78 lbs/sq.ft. 3.9 kg/sq.m.
Bottom Coefficient Of Friction 0.20 (approx.) 0.20 (approx.)
Minimum Rec. Pulley Diameters 3.0 in. 76 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: #1,36, UCM36
  • Alligator*: 7
  • Staple*: 62

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): Dissipative
  • MSHA (CFR 18.65): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No
  • 2G (FLAME): Yes

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 130LS FLb | Package Handling with MSHA Flame Retardant
The rugged 2 ply carcass with standard weave and interwoven plies provides excellent rip & tear resistance and the low friction top surface for easy loading makes it ideal for airport applications.

PKG 130LS FLb

The rugged 2-ply combination of multi x multi and interwoven fabric construction is specially designed for airport transport applications that demonstrates good rip, tear, elongation and fastener holding capability. The Low-friction bottom surface reduces noise and any potential interaction with pulley lagging compounds.

Technical Data:

Attributes Imperial Metric
Working Tension 130 piw 23 KN/M
Number Of Plies 2 2
Fabric Type Hybrid-Polyester Hybrid-Polyester
Top Surface Friction Friction
Bottom Surface BareLow-Friction BareLow-Friction
Overall Gauge (Approximate) 0.115 in. 2.9 mm
Weight (Approximate) 0.78 lbs/sq.ft. 3.9 kg/sq.m.
Bottom Coefficient Of Friction 0.20 (approx.) 0.20 (approx.)
Minimum Rec. Pulley Diameters 3.0 in. 76 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: #1,36, UCM36
  • Alligator*: 7
  • Staple*: 62

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No
  • 2G (FLAME): Yes

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 130LS GLb | Package Handling with MSHA Flame Retardant
The rugged 2 ply carcass with standard weave and interwoven plies provides excellent rip & tear resistance and the grooved top surface makes it ideal for airport incline/decline applications.

PKG 130LS GLb

The rugged 2-ply combination of multi x multi and interwoven fabric construction that demonstrates good rip, tear, elongation and fastener holding capability. The combination of Groovy-Top impression and the fabric construction make it ideal for airport incline/decline applications. The low-friction bottom surface reduces noise and any potential interaction with pulley lagging compounds.

Technical Data:

Attributes Imperial Metric
Working Tension 130 piw 23 KN/M
Number Of Plies 2 2
Fabric Type Hybrid-Polyester Hybrid-Polyester
Top Surface Groovy Groovy
Bottom Surface BareLow-Friction BareLow-Friction
Overall Gauge (Approximate) 0.155 in. 3.9 mm
Weight (Approximate) 1.0 lbs/sq.ft. 4.9 kg/sq.m.
Bottom Coefficient Of Friction 0.20 (approx.) 0.20 (approx.)
Minimum Rec. Pulley Diameters 3.0 in. 76 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2 or U2
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No
  • 2G (FLAME): Yes

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 150KSK LLb | Package Handling with MSHA Flame Retardant
The rugged 3 ply carcass with monofilament fabric in the top and bottom plies provides excellent lay flat rigidity and the low friction top surface for easy loading makes it ideal for package handling.

PKG 150KSK LLb

This unique 3-ply belt is a high-performance, economical alternative to plied rubber belts in package handling and other general-purpose applications where low coefficient of friction surface is required for both top and bottom surfaces. Monofilament fabric in the top and bottom plies provides excellent transverse rigidity so belt lays flat and does not buckle. Our unique HPC technology delivers superior tracking performance and edge wear resistance.

Technical Data:

Attributes Imperial Metric
Working Tension 150 piw 26 KN/M
Number Of Plies 3 3
Fabric Type Multifilament & Hybrid Interwoven Multifilament & Hybrid Interwoven
Top Surface Low Friction Low Friction
Bottom Surface Low Friction Low Friction
Overall Gauge (Approximate) 0.140 in. 3.6 mm
Weight (Approximate) 0.87 lbs/sq.ft. 4.2 kg/sq.m.
Bottom Coefficient Of Friction 0.18 (approx.) 0.18 (approx.)
Minimum Rec. Pulley Diameters 5.0 in. 127 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: #2HT
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • ASTM (D-378): Yes
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • ISO (340): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 150T1 FBb (Fortress) | Package Handling with MSHA Flame Retardant
Our exclusive, patented polyester and nylon Triple-Warp fabric weave makes Fortress the belt of choice for even the most abusive package handling applications.

PKG 150T1 FBb (Fortress)

Our exclusive, patented* polyester and nylon Triple-Warp fabric weave makes Fortress the belt of choice for even the most abusive package handling applications. This rugged belt design provides superior rip, tear and fastener holding capabilities.

* U.S. Patent No. 6,427,728

Technical Data:

Attributes Imperial Metric
Working Tension 150 piw 27 KN/M
Number Of Plies 1 1
Fabric Type Triple-Warp Triple-Warp
Top Surface Friction Friction
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.170 in. 4.3 mm
Weight (Approximate) 0.90 lbs/sq.ft. 4.5 kg/s q.m.
Bottom Coefficient Of Friction 0.24 (approx.) 0.24 (approx.)
Minimum Rec. Pulley Diameters 4.0 in. 102 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2, U2, 3
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): Pending
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 160TwSu FLB | Package Handling with MSHA Flame Retardant
Designed for the most severe package handling applications, the 2 ply carcass demonstrates superior rip, tear and fastener holding capability. The low friction bottom cover is ideal for slider beds.

PKG 160TwSu FLB

This rugged belt demonstrates superior rip, tear and fastener holding capability. It is designed for the most severe package-handling service, and with its low-friction pulley cover it is ideal for long slider-bed service.

Technical Data:

Attributes Imperial Metric
Working Tension 160 piw 29 KN/M
Number Of Plies 2 2
Fabric Type Hybrid-Polyester Hybrid-Polyester
Top Surface Friction Friction
Bottom Surface Bareback / Low-Friction Bareback / Low-Friction
Overall Gauge (Approximate) 0.165 in. 4.2 mm
Weight (Approximate) 1.0 lbs/sq.ft. 5.0 kg/sq.m.
Bottom Coefficient Of Friction 0.18 (approx.) 0.18 (approx.)
Minimum Rec. Pulley Diameters 4.5 in. 114 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: #2HT, #3HT
  • Alligator*:
  • Staple*:

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • NCB (158:1989): No
  • 2G (FLAME): Yes

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PKG 200KSK LLb | Package Handling with MSHA Flame Retardant
The rugged 3 ply carcass with monofilament fabric in the top and bottom plies provides excellent lay flat rigidity and the low friction top surface for easy loading makes it ideal for package handling.

PKG 200KSK LLb

PKG 200KSK LLb

This unique 3-ply belt is a high-performance, economical alternative to plied rubber belts in package handling and other general-purpose applications where low coefficient of friction surface is required for both top and bottom surfaces. Monofilament fabric in the top and bottom plies provides excellent transverse rigidity so belt lays flat and does not buckle. Unique HPC technology delivers superior tracking performance and edge wear resistance.

Technical Data:

Attributes Imperial Metric
Working Tension 200 piw 35 KN/M
Number Of Plies 3 3
Fabric Type Combination Combination
Top Surface Low Friction Low Friction
Bottom Surface Low Friction Low Friction
Overall Gauge (Approximate) 0.190 in. 4.8 mm
Weight (Approximate) 1.18 lbs/sq.ft. 5.7 kg/s q.m.
Bottom Coefficient Of Friction 0.18 (approx.) 0.18 (approx.)
Minimum Rec. Pulley Diameters 5.0 in. 127 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 3 or U3
  • Alligator*: 25
  • Staple*: 187

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PVS 100S1 RBb | PVC with Soft Durometer
The rugged hybrid interwoven carcass provides excellent rip & tear resistance and our unique siped ridge Ruffgrip top cover provides superior gripping power for many incline/decline applications.

PVS 100S1 RBb

PVS 100S1 RBb

The unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.

Technical Data:

Attributes Imperial Metric
Working Tension 100 piw 18 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Ruffgrip Ruffgrip
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.280 in. 7.1 mm
Weight (Approximate) 1.04 lbs/sq.ft. 5.0 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2 or U22
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PVS 100V2 RBb | PVC with Soft Durometer
The rugged 2 ply carcass provides excellent rip & tear resistance and our unique siped ridge Ruffgrip top cover provides superior gripping power for many incline/decline applications.

PVS 100V2 RBb

PVS 100V2 RBb

The unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. State-of-the-art HPC technology delivers superior tracking performance, resistance to edge wear and flexibility over small pulleys. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.

Technical Data:

Attributes Imperial Metric
Working Tension 100 piw 18 KN/M
Number Of Plies 2 2
Fabric Type Spun Poly Spun Poly
Top Surface Ruffgrip Ruffgrip
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.310 in. 7.9 mm
Weight (Approximate) 1.00 lbs/sq.ft. 4.8 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 2 or U2
  • Alligator*:
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PVS 120S1 RBb | PVC with Soft Durometer
Our unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement.

PVS 120S1 RBb

PVS 120S1 RBb

Our unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.

Technical Data:

Attributes Imperial Metric
Working Tension 120 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Ruffgrip Ruffgrip
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.310 in. 7.9 mm
Weight (Approximate) 1.13 lbs/sq.ft. 5.5 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 2.0 in.
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2 or U2
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PVS 150S1 RBb | PVC with Soft Durometer
The rugged hybrid interwoven carcass provides excellent rip & tear resistance and our unique siped ridge Ruffgrip top cover provides superior gripping power for many incline/decline applications.

PVS 150S1 RBb

PVS 150S1 RBb

Our unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.

Technical Data:

Attributes Imperial Metric
Working Tension 150 piw 26 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Ruffgrip Ruffgrip
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.320 in. 8.1 mm
Weight (Approximate) 1.20 lbs/sq.ft. 5.8 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.5 in. 64 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 3 or U3
  • Alligator*: 25
  • Staple*: 187

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PVS 170S1 RBr | PVC with Soft Durometer
The rugged hybrid interwoven carcass provides excellent rip & tear resistance and our unique siped ridge Ruffgrip top cover provides superior gripping power for many incline/decline applications.

PVS 170S1 RBr

PVS 170S1 RBr

Our unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. It is ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.

Technical Data:

Attributes Imperial Metric
Working Tension 170 piw 30 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Ruffgrip Ruffgrip
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.370 in. 9.4 mm
Weight (Approximate) 1.40 lbs/sq.ft. 6.8 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 4.0 in. 102 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 4 or U4
  • Alligator*: 27
  • Staple*: 187

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PVS 200S1 RBb | PVC with Soft Durometer
The rugged hybrid interwoven carcass provides excellent rip & tear resistance and our unique siped ridge Ruffgrip top cover provides superior gripping power for many incline/decline applications.

PVS 200S1 RBb

PVS 200S1 RBb

Our unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.

Technical Data:

Attributes Imperial Metric
Working Tension 200 piw 35 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Ruffgrip Ruffgrip
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.370 in. 9.4 mm
Weight (Approximate) 1.40 lbs/sq.ft. 6.8 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 5.0 in. 127 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 4 or U4
  • Alligator*: 27
  • Staple*: 187

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


PVS 220S2 RBb | PVC with Soft Durometer
The rugged 2 ply hybrid interwoven carcass provides excellent rip & tear resistance and our unique siped ridge Ruffgrip top cover provides superior gripping power for many incline/decline applications.

PVS 220S2 RBb

PVS 220S2 RBb

Our unique siped ridge Ruffgrip top cover profile provides superior gripping power and is recommended for many incline/decline applications that require safe handling and positive movement. State-of-the-art HPC technology delivers superior tracking performance, resistance to edge wear and flexibility over small pulleys. Ideal for conveying luggage, boxes, plastic, paper, corrugated cardboard and wood.

Technical Data:

Attributes Imperial Metric
Working Tension 220 piw 39 KN/M
Number Of Plies 2 2
Fabric Type Spun Poly Spun Poly
Top Surface Ruffgrip Ruffgrip
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.360 in. 9.1 mm
Weight (Approximate) 1.35 lbs/sq.ft. 6.5 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 5.0 in. 127 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 4 or U4
  • Alligator*: 27
  • Staple*: 187

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


QPH 110W FBb | Quiet Package Handling PVC
Our uniquely quiet QPH compound and our whisper weave all-polyester fabric provide lower noise levels in roller, live roller and slider bed conveying systems.

QPH 110W FBb

QPH 110W FBb

Our uniquely quiet QPH compound and our whisper weave all-polyester fabric provide lower noise levels in roller, live roller and slider bed conveying systems. The polyester carcass delivers low stretch characteristics. The frictioned top cover helps to protect the carcass and the brushed bottom cover lowers the coefficient of friction.

Technical Data:

Attributes Imperial Metric
Working Tension 110 piw 19 KN/M
Number Of Plies 1 1
Fabric Type Whisper Spun Whisper Spun
Top Surface Friction Friction
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.075 in. 1.9 mm
Weight (Approximate) 0.45 lbs/sq.ft. 2.2 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: UX1SP
  • Alligator*: 1
  • Staple*: 62

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


QPH 120WP CBb | Quiet Package Handling PVC
These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills.

QPH 120WP CBb

QPH 120WP CBb

These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills. Smooth top cover finish maintains an excellent appearance. Whisper weave brushed bottom offers quiet running service in slider bed applications. Unique HPC technology offers superior tracking performance, edge wear resistance and flexibility over small pulleys.

Technical Data:

Attributes Imperial Metric
Working Tension 120 piw 21 KN/M
Number Of Plies 2 2
Fabric Type Whisper Spun Whisper Spun
Top Surface Smooth Smooth
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.135 in. 3.4 mm
Weight (Approximate) 0.80 lbs/sq.ft. 3.9 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 1 or UX1
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


QPH 150W2 BBb | Quiet Package Handling PVC
These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills.

QPH 150W2 BBb

QPH 150W2 BBb

These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills. Whisper weave fabric in both plies offers quiet running operation in both slider bed and live roller applications. Unique HPC technology offers superior tracking, edge wear resistance and flexibility over small pulleys.

Technical Data:

Attributes Imperial Metric
Working Tension 150 piw 26 KN/M
Number Of Plies 2 2
Fabric Type Whisper Spun Whisper Spun
Top Surface Brushed Brushed
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.125 in. 3.2 mm
Weight (Approximate) 0.76 lbs/sq.ft. 3.7 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.5 in. 64 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 1 or UX1
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


QPH 220WS BBb | Quiet Package Handling PVC
These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills.

QPH 220WS BBb

QPH 220WS BBb

These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills. Whisper weave brushed bottom offers quiet running service in slider bed applications. Rugged ribbed top ply offers excellent wear characteristics where slider abrasion exists. Unique HPC technology offers superior tracking, edge wear resistance and flexibility over small pulleys.

Technical Data:

Attributes Imperial Metric
Working Tension 220 piw 39 KN/M
Number Of Plies 2 2
Fabric Type Whisper Spun Whisper Spun
Top Surface Brushed Brushed
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.190 in. 4.8 mm
Weight (Approximate) 1.10 lbs/sq.ft. 5.3 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 5.0 in. 127 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 2 or U2
  • Alligator*: 25
  • Staple*: 187

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


QPH 90WP CBb-S | Quiet Package Handling PVC
These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills.

QPH 90WP CBb-S

QPH 90WP CBb-S

These quiet-running, low coefficient-of-friction belts are excellent in postal facilities, parcel terminals, distribution warehousing, airports, automotive plants and lumber mills. Smooth top cover finish maintains an excellent appearance. Whisper weave brushed bottom offers quiet running service in slider bed applications. Unique HPC technology offers superior tracking performance, edge wear resistance and flexibility over small pulleys.

Technical Data:

Attributes Imperial Metric
Working Tension 90 piw 16 KN/M
Number Of Plies 2 2
Fabric Type Whisper Spun Whisper Spun
Top Surface Smooth Smooth
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.120 in. 3.0 mm
Weight (Approximate) 0.70 lbs/sq.ft. 3.4 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 1.5 in. 38 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: 1SP or UX1SP
  • Alligator*: 7
  • Staple*: 62

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


UMVS 100RM GLgx | Ultra Modified, Low Durometer Vinyl
Transversely rigid, this belt provides safe handling for packaged goods, plastic parts and totes in airports, distribution centers, post offices and warehouses.

UMVS 100RM GLgx

UMVS 100RM GLgx

Transversely rigid, this belt provides safe handling for packaged goods, plastic parts and totes in airports, distribution centers, post offices and warehouses. Special high coefficient of friction, low durometer UMVS top cover compound combined with our Groovy-Top incline cover profile can handle inclines of 45 degrees depending on product conveyed and provides excellent grip for starting and stopping product movement.

Technical Data:

Attributes Imperial Metric
Working Tension 100 piw 18 KN/M
Number Of Plies 2 2
Fabric Type Multi x Mono Multi x Mono
Top Surface Groovy Top Groovy Top
Bottom Surface Low Friction Low Friction
Overall Gauge (Approximate) 0.100 in. 2.5 mm
Weight (Approximate) 0.60 lbs/sq.ft. 2.9 kg/s q.m.
Bottom Coefficient Of Friction 0.18 (approx.) 0.18 (approx.)
Minimum Rec. Pulley Diameters 2.0 in. 51 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: Yes
  • Finger: Yes
  • Bias Stepped: Yes
  • Skived Bias: Yes
  • Clipper*: UX1XSP
  • Alligator*: 1
  • Staple*: 62

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65):No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


USPS 120S1 FBb
Manufactured to meet the United States Postal Service’s strict standards, this belt is used in slider bed applications for accumulating or diverting product is required.

USPS 120S1 FBb

USPS 120S1 FBb

This belt is specially manufactured to meet the rigorous standards of the United States Postal Service and is a good choice for slider bed conveying where accumulation or diverting of product is required. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. The brushed bottom surface provides low coefficient of friction for slider bed applications.

Technical Data:

Attributes Imperial Metric
Working Tension 120 piw 21 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Friction Friction
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.125 in. 3.2 mm
Weight (Approximate) 0.66 lbs/sq.ft. 3.2 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 2.5 in. 64 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 1 or UX1
  • Alligator*: 7
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


USPS 150S1 FBb
Manufactured to meet the United States Postal Service’s strict standards, this belt is used in slider bed applications for accumulating or diverting product is required.

USPS 150S1 FBb

USPS 150S1 FBb

This belt is specially manufactured to meet the rigorous standards of the United States Postal Service and is a good choice for slider bed conveying where accumulation or diverting of product is required. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. The brushed bottom surface provides low coefficient of friction for slider bed applications.

Technical Data:

Attributes Imperial Metric
Working Tension 150 piw 26 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Friction Friction
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.170 in. 4.3 mm
Weight (Approximate) 0.91 lbs/sq.ft. 4.4 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 4.0 in. 102 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 2 or U2
  • Alligator*: 20
  • Staple*: 125

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.


USPS 200S1 FBb
Manufactured to meet the United States Postal Service’s strict standards, this belt is used in slider bed applications for accumulating or diverting product is required.

USPS 200S1 FBb

USPS 200S1 FBb

This belt is specially manufactured to meet the rigorous standards of the United States Postal Service and is a good choice for slider bed conveying where accumulation or diverting of product is required. The all-polyester, single-ply interwoven carcass provides low-stretch, excellent fastener retention and good tear resistance. The brushed bottom surface provides low coefficient of friction for slider bed applications.

Technical Data:

Attributes Imperial Metric
Working Tension 200 piw 35 KN/M
Number Of Plies 1 1
Fabric Type Spun Poly Spun Poly
Top Surface Friction Friction
Bottom Surface Brushed Brushed
Overall Gauge (Approximate) 0.220 in. 5.6 mm
Weight (Approximate) 1.33 lbs/sq.ft. 6.4 kg/s q.m.
Bottom Coefficient Of Friction 0.25 (approx.) 0.25 (approx.)
Minimum Rec. Pulley Diameters 6.0 in. 152 mm
Elongation At Rated Tension < 2% < 2%
Working Temperature 20° to 180°F -7° to 82°C

Splicing Methods:

  • FOF: No
  • Finger: Yes
  • Bias Stepped: No
  • Skived Bias: Yes
  • Clipper*: 4 or U4
  • Alligator*: 27
  • Staple*: 187

* Fastener manufacturer should be consulted to review belt and application information.


Compliance (Government Regulations):

  • FDA/USDA: No
  • OSHA (< 300 Megohms): No
  • MSHA (CFR 18.65): No
  • CSA (M422-87): No
  • FRAS (1334.12): No
  • NCB (158:1989): No

No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.